|Pixel Pitch:||1-5||Brightness:||1000 Nits|
|IP Rating:||IP42||Refresh Rate:||3840 HZ|
FCC rubber Soft LED Module,
IP42 rubber Soft LED Module,
1200 nits LED Screen Panel
LED Soft Module Panel Front Service Indoor 3840hz 1200 nits LED Screen Panel
Introduction of LED flexible screen
Flexible LED display module, ingeniously invented and designed from the concept of light bar color screen combined with high construction efficiency;
flexible LED display module can splice curved screens, cylinders, curved screens and other displays according to needs, which is a prominent feature and Technological improvements that show progress.
For dynamic communication at your events or decoration of stores, trade shows, exhibitions. Construct a dynamic
message, including animated logos, slide shows and even video. The screen adapts to fit the shape of the surface
on which it hangs (columns, corners, etc.). Fits inside custom made furniture. Any shape or size of screen can
be constructed through the assembly of either A4-size or 1m2 LED sheets (Marquees, 4x3, columns, most any
configuration) or ribbons (with a spacing of 10mm to 40mm). The screen is very bright (visible in daylight as well
as at night), lightweight and thin (4mm). You can store your display program on an SD card or even connect your
screen directly to a PC for unlimited real-time modifications.
How it works:
Each LED is addressed directly by the controller. Each sheet connects to the next on all four sides via a slider
system, and then is connected to a 4-pin plate socket which enables the creation of a screen having a surface
spanning several square meters. Five types of controllers provide options for automatic or remote control.
Main features of flexible LED screen
1. The installation of the flexible LED display screen can be any curved surface, suitable for artistic modeling;
2. Suitable for curved surface display such as stage background, exhibition hall, indoor meeting room, etc.;
3. The installation of the flexible LED display screen is to complete the on-site installation structure, and use strong magnet adsorption installation, direct adsorption, which is convenient for installation and maintenance.
And the safety and stability are high.
4. The PCB adopts a flexible soft board, and the mask and bottom shell are made of rubber;
5. The connection between the modules adopts high-end connector-HDMI connector;
6. Using distributed scanning and modular design technology, the reliability and stability are higher;
7. High grayscale and high refresh rate design: The gray scale can be 10-16bit, and the refresh frequency can be 400-1500Hz, so that the LED display screen can display images without delay or smear.
Flex Series soft flexible LED module display is designed for artistic and creative LED Screen applications.
It is made of soft PCB board and high-quality silicone rubber body.It is much flexible and can be fitted any curved surface with magnetic aborption to all kinds of shapes structure.
The soft LED modules can be spliced into convexconcavecolumns wave surfaces,cylinder,conesect irregular shapes with its high flexibility.
It can be widely used in museumsgalleries, lounges, hotels,club,stagestudio,super marketshopping mallstadium concert, amusement park,sight-seeing are real estateairport etc.
It also has higher brightness and waterproof for oudoor application
|Brightness||1000 Nits||1000 Nits||1000 Nits||1000 Nits||1000 Nits|
|Density||284444 Pixels/sqm||160000 Pixels/sqm||111111 Pixels/sqm||62500 Pixels/sqm||40000 Pixels/sqm|
|Scan Mode||1/32 Scan||1/24 Scan||1/20 Scan||1/15 Scan||1/16 Scan|
|Module Resolution||128 x 64||96*48||80*40||60*30||64*32|
|Weight||210g/per panel||205g/per panel||200g/per panel||190g/per panel||220g/per panel|
|IP Degree||IP 42||IP 42||IP 42||IP 42||IP 42|
|Working Voltage||DC 5V||DC 5V||DC 5V||DC 5V||DC 5V|
|Input Voltage||AC 96-260V||AC 96-260V||AC 96-260V||AC 96-260V||AC 96-260V|